DIY Wooden Centerpiece Box
Sponsored Post.
Display flowers or your favorite decorative items on your table in this rustic DIY centerpiece box. This is perfect for the holiday or party table. Perfectly sized to accommodate pint sized mason jars, this Do-it-yourself project is sure to provide countless uses.
Materials
• 1”x4”x 8’ common board
• .25” x 4” x 48” craft board
• RapidFuse Wood Glue
• 1 ¼” nails
• Natural Plastic Wood Filler
Tools
• Miter Saw
• Brad Nailer or Hammer
• Sander
• Cricut (Optional)
Cut List
• .25” x 4” x 48 @ 12.5” (Bottom)
• 1”x4”x 8’ common board
• 2 – 3.5” (Sides)
• 2 – 14” (Front and Back)
• 2 – 3 1/4” (Dividers)
Instructions
1. Sand and stain the cut pieces.
2. Attach the 2 sides to the Bottom piece using RapidFuse. Secure with 1” brad nails.
3. Mark lines for the divider pieces measuring 3 ¾” from either end. This centerpiece holds pint size mason jars.
4. Attach front piece to the two sides using RapidFuse and brad nails. Lining the front and sides flush on the sides.
5. Attach the Divider pieces to the front and bottom using RapidFuse and brad nails. Line the 1×4 up with the pre-drawn lines.
6. Finally attach the back to the centerpiece completing the box. Attach using RapidFuse and brad nails.
7. Fill nails holes with wood filler, sand and touch up the stain.
To decorate this centerpiece I stained it with Minwax special walnut. Express yourself with your centerpiece. Decorate it with vinyl decals.
Enjoy! Till Next Time. ~T.
Can you help me with the measurement if i want it 3′ long?
Yes I can. Email me at [email protected] or message me on Facebook @ Facebook.com/Toolboxdivas