DIY | My Projects | Projects | Tutorials | Woodworking

DIY Wooden Centerpiece Box


DIY Wooden Centerpiece- ToolBox Divas

 

Sponsored Post.

Display flowers or your favorite decorative items on your table in this rustic DIY centerpiece box.  This is perfect for the holiday or party table.  Perfectly sized to accommodate pint sized mason jars, this Do-it-yourself project is sure to provide countless uses.

Materials
• 1”x4”x 8’ common board
• .25” x 4” x 48” craft board
RapidFuse Wood Glue
• 1 ¼” nails
Natural Plastic Wood Filler

Tools
Miter Saw  Ryobi Miter saw
Brad Nailer or Hammer Ryobi Brad Nailer
Sander ryobi sander

Cricut  (Optional) cricut explore

Cut List
• .25” x 4” x 48 @ 12.5” (Bottom)
• 1”x4”x 8’ common board
• 2 – 3.5” (Sides)
• 2 – 14” (Front and Back)
• 2 – 3 1/4” (Dividers)

DIY Wooden Centerpiece -cut list- Toolbox Divas

Instructions

1. Sand and stain the cut pieces.

1 DIY Wooden Centerpiece - ToolBox Divas

2. Attach the 2 sides to the Bottom piece using RapidFuse. Secure with 1” brad nails.

2. DIY Wooden Centerpiece - ToolBox Divas  2 -2 DIY Wooden Centerpiece - ToolBox Divas

3. Mark lines for the divider pieces measuring 3 ¾” from either end. This centerpiece holds pint size mason jars.

3. DIY Wooden Centerpiece - ToolBox Divas 3-2. DIY Wooden Centerpiece - ToolBox Divas

4. Attach front piece to the two sides using RapidFuse and brad nails. Lining the front and sides flush on the sides.

4. DIY Wooden Centerpiece - ToolBox Divas

5. Attach the Divider pieces to the front and bottom using RapidFuse and brad nails. Line the 1×4 up with the pre-drawn lines.

5. DIY Wooden Centerpiece - ToolBox Divas 5-2. DIY Wooden Centerpiece - ToolBox Divas

6. Finally attach the back to the centerpiece completing the box. Attach using RapidFuse and brad nails.

7. Fill nails holes with wood filler, sand and touch up the stain.

To decorate this centerpiece I stained it with Minwax special walnut. Express yourself with your centerpiece. Decorate it with vinyl decals.

DIYwithDAP

rustic wooden centerpiece - Toolbox Divas

Enjoy! Till Next Time. ~T.

Similar Posts

3 Comments

  1. Can you help me with the measurement if i want it 3′ long?

Leave a Reply

Your email address will not be published. Required fields are marked *