Whether you’re refinishing cabinets or dressers when it’s time to look for drawer pulls and knobs the cost of refinishing skyrockets. Let’s face it. Handles are expensive! The average drawer pulls depending on the size and type of material can range from $3 to $13. Normally the really nice ones are at least $6 a piece. These days you can make handles out of just about anything from rope to old toys to copper pipes. And truth be told I considered copper pipes, that is until I made a trip down to Lowe’s and saw the cost of copper. A 1 foot 3/4″ diameter pipe is $11! So I had to reevaluate my process. I’m going to show you how to get the look and feel of the expensive drawer pulls for a fraction of the cost.
Required Tools
Saw
Drill
Materials(Makes 3 – 2′ drawer pulls)
2 – 0.875-in (7/8in) x 48-in Round Poplar Dowels (Side note: This can be done with dowels of any thickness just make sure the bell hangers are smaller in diameter to ensure a tight fit.)
First mark on the drawer where the holes will be drilled for the drawer pulls to ensure the pulls are installed evenly on each drawer.
Cut the wood dowels down to 2′ each. This can be done with a miter saw or a simple hand saw.
Once the dowels are cut lay the pieces out and the bell hangers out on some plastic and spray evenly with your choice of metallic paint spray. For these I used Vintage Rose Gold by Rust-OLeum. Be sure to spray out in the open or in a space with good ventilation. Also I recommend wearing gloves. Spray paint can get messy.
Allow the pieces 20 minutes or so to dry. Spray paint dries quickly.
Now install the bell hangers to the drawers using 1 1/4″ construction screws. I like construction screws because it eliminates the need to pre-drill holes.
Unclamp the bell hanger and place the dowel in the center. It works best when the bell hangers close vertically like shown in the picture.
The dowel will extend evenly on each side of the bell hang. In this case, the dowel extends 4 inches on either side of the bell hanger. Make sure the sides are even before tightening the screws to secure the dowel.
A carpenter’s square is helpful in ensuring the dowels are all installed evenly from drawer to drawer.
In addition, I used a small piece of wood (1×2) to further ensure the handles are lined up perfectly.
Once its all installed you are done.
This can be done on any piece of furniture or cabinets. Using chrome or stainless steel metallic paint can give the look of sleek expensive door pulls on cabinets. No one would ever be the wiser.
Learn how to use a miter saw and safely make straight, beveled and compound cuts with ease. *This post is sponsored by The Home Depot and contains affiliate links and I will be compensated if you make a purchase after clicking on my links. What is a Miter Saw? A miter saw is a stationary saw that is…
In this article details a step by step how to instructional on how to remove an old tile backsplash without causing severe damage to the drywall. Removing an old tile backsplash can seem like a daunting, maybe even infeasible task. There are questions like, ‘how do I begin to remove this wall essentially tiled with stone? If…
The backsplash area in the kitchen plays a major role in the design outlook of the house. When decorating a kitchen, it is best to do it yourself so that you create it as you would like it to be. Installing a tile backsplash is a simple procedure consisting of few steps and the use…
Upgrade your curb appeal by installing solar lighting. In this tutorial, I will demonstrate how to make solar walkway lights that you can customize. This Summer I am revamping my backyard and deck. I started last week by creating these DIY wooden lanterns to accessorize my finished space. This weekend I focused on creating lighting for…
Woodburning – or pyrography – is a crafting hobby involving burning a design into wood. Before I started woodburning, I thought I’d never be able to get into a hobby like it. I figured the tools would be too expensive, there would be a difficult learning curve, and that I’d need some serious artistic skills…
Learn easy demolition tips for removing ground level deck or porch railing. *This post is sponsored by The Home Depot. (These instructions exclude an elevated deck.) A few years ago when I bought my house I updated my deck by using a deck paint that would extend the life and use of my deck. …
What a great idea! I’m considering painting my kitchen cabinets a shade of white and want to do a nickel/brushed nickel spray for the knobs. Can you recommend a color of spray paint? I get in the store and just feel overwhelmed by the variety, and walk out with nothing. I’ve been doing this for about 8 mos.! I lose my motivation in the paint aisle every time!
Michel thank you so much! I like anything metallic Hahaha. I can’t say I have a particular favorite. But I love Rustoleum and Krylon color options. Copper and Gold are my colors of choice these days. But don’t get frustrated. Pick 3 and go home and do a test spray paint job. Trust me, you can never have too many spray paint colors. So don’t worry if you don’t use it this time because you will later. 😉
Oh my gosh!! I’ve been wanting a long handle for my bathroom for ages! But the size I want is special order at Lowes. And expensive to boot! Now I see this and think DOH! WHY DIDNT I THINK OF THAT???!!! Haha! Off to lowes AGAIN!!……….
the handles R BRILLIANT! THX 4 the tip!
Thank you so much Cheryl! I now use wooden dowels in all my projects and love I can make it any color or size for a relatively low cost.
What a great idea! I’m considering painting my kitchen cabinets a shade of white and want to do a nickel/brushed nickel spray for the knobs. Can you recommend a color of spray paint? I get in the store and just feel overwhelmed by the variety, and walk out with nothing. I’ve been doing this for about 8 mos.! I lose my motivation in the paint aisle every time!
Michel thank you so much! I like anything metallic Hahaha. I can’t say I have a particular favorite. But I love Rustoleum and Krylon color options. Copper and Gold are my colors of choice these days. But don’t get frustrated. Pick 3 and go home and do a test spray paint job. Trust me, you can never have too many spray paint colors. So don’t worry if you don’t use it this time because you will later. 😉
It turned out beautiful…. love the creativity!
Cielo
Thank you so much!
Oh my gosh!! I’ve been wanting a long handle for my bathroom for ages! But the size I want is special order at Lowes. And expensive to boot! Now I see this and think DOH! WHY DIDNT I THINK OF THAT???!!! Haha! Off to lowes AGAIN!!……….
AWESOME!! I love using dowels as handles. It’s my go to. Please share photos. I’d love to see it.
These are so incredibly brilliant! I may have to use them in a project soon. Thank you for the awesome tutorial!
Hey Marianne! Thank you so much! I can’t wait to see how you use this trick on your next project.
These are gorgeous! Would this work for pulls in the kitchen or will the paint wash off if the pulls get wet?
thank you so much! i believe it will. I’ve had these for over 6 years now with no issues.
Cute idea, but unfortunately the pics are very small. I have no idea what a bell hanger looks if I had to go to the hardware centre!
Where do you find the bell clamps? I have been unable to find them anywhere.